Categories

Vacuum filled nitrogen UV LED glue curing machine

Low oxygen environment, eliminating oxygen blocking effect, ensuring stable and consistent UV debonding and curing effect.
Sep 28th,2026 54 Views

In the field of UV curing, oxygen is the biggest enemy. Oxygen blocking polymerization often leads to surface stickiness, decreased hardness, and impaired adhesion, which is particularly evident in critical optical and semiconductor applications. To address this issue, Blue Shield has launched a fully automatic vacuum filled nitrogen UVLED curing system designed specifically for low oxygen environments.



Why is oxygen blocking so important?

Almost all radiation cured materials are affected by oxygen in the air. The oxygen concentration is highest in the surface layer, causing the top layer to remain uncured (sticky) while the bottom layer has already solidified. Experimental results have shown that curing a 1 μ m thick coating in air consumes 20 times more energy than curing in a nitrogen environment. This not only prolongs the curing time, but also damages key surface properties such as hardness, wear resistance, and scratch resistance.


Product working principle

The equipment integrates vacuum pumping, nitrogen filling, oxygen monitoring, and high-power UVLED light source. It uses a 365nm wavelength UVLED light source to extract air (including oxygen) from the sealed chamber to a near vacuum state through a vacuum pump, and then inject nitrogen gas back and forth 1-3 times to reduce oxygen concentration and ensure that ultraviolet radiation works in an anaerobic environment. The equipment is suitable for curing optical special UV adhesives and has functions such as vacuum pumping, nitrogen filling, UVLED light curing, oxygen detection, temperature control, and safety protection.

Core technological advantages:

  • Low oxygen environment, eliminating oxygen blocking effect, ensuring stable and consistent UV curing/debonding effect.

  • Fully automatic process flow: Vacuum pumping → Nitrogen displacement → UV exposure → Vacuum breaking.

  • High stability water-cooled UV LED light source, long service life, adjustable power.

  • Real time monitoring of oxygen concentration, temperature, and pressure with alarm function.

  • Easy to operate touch screen, real-time oxygen monitoring, closed-loop nitrogen control.

  • Sealed chamber design, low nitrogen consumption, clean and environmentally friendly.


Where is it suitable for use?

  • Optical special UV adhesive curing

  • Semiconductor wafer debonding

  • Optical lens bonding

  • Precision electronic component packaging

  • Medical device assembly 



Product Specifications

Item Specification
Model LDP‑LFA5K1‑MAP
Application Special optical UV adhesive curing and UV debonding
Curing Method UVLED photo‑curing
Overall Dimension L1200mm × W800mm × H1700mm
Vacuum Chamber Inner Dimension L600mm × W600mm × H800mm
Construction Material Sheet metal
Power Supply AC 380V, 50/60Hz
Total Power 9KW
Control Mode PLC + Touch Screen
Operating Ambient Ambient temperature: 0‑45℃; Relative humidity ≤85%RH (non‑condensing); Reserve ≥20 cm clearance around unit for heat dissipation
Safety Features Emergency‑stop buttons, door interlock for chamber lid opening, overtemperature alarm, oxygen‑content abnormal alarm, nitrogen‑leakage alarm, UV‑light leakage prevention, fan thermal protection

Whether it's selection consultation, technical issues, or customization needs, wavelength, spot size, power, control mode - can be customized according to needs.
Welcome to contact us, our team is always at your service.

If you need UV processing equipment that meets low oxygen process requirements, please feel free to contact us for more information.