Categories

Water-cooled 395nm UV LED Curing Lamp | Rotary Screen Printing & Offset Printing Ink Curing Equipment

Landun water-cooled high intensity UV LED curing lamp is specially developed for turntable screen printing, pad printing and label UV ink curing.
Oct 21st,2026 30 Views


In the industries of rotary screen printing, transfer printing, and label printing, many factories have long been troubled by the problem of UV curing. Traditional UV mercury lamps generate a large amount of heat during operation, making it easy for plastic and glass workpieces to deform due to heat, resulting in product scrap; Mercury lamps have a short service life of only a few hundred to thousands of hours, high energy consumption, and require frequent shutdowns to replace the lamp tubes, disrupting the continuous production rhythm of the rotary production line and increasing labor and consumable costs.

Ordinary air-cooled UV LED curing equipment on the market, once operated at high power for a long time, has insufficient heat dissipation capacity, and the light decay rate of the lamp beads is fast, resulting in continuous attenuation of light intensity. Unstable light intensity directly leads to uneven curing of UV ink, with the surface layer being dry while the bottom layer is not completely dry, resulting in defects such as ink peeling, scratching, poor adhesion, and ink sticking back in the finished product, with a high defect rate. At the same time, most of the simple curing equipment cannot be linked with the rotary printing machine, the power cannot be flexibly adjusted, it is difficult to match the multi station rotary cycle, and lacks fault warning function. When the light source is abnormal, it is easy for the entire batch of products to be scrapped.

In response to the pain points in the aforementioned industries, Blue Shield Water Cooled 395nm UV LED Curing Lamp provides a complete solution. The equipment is equipped with a water circulation water cooling system, which works continuously for a long time with low temperature rise, effectively avoiding thermal deformation of the workpiece; The lifespan of the lamp beads can reach 15000 hours, greatly reducing maintenance downtime. High intensity output, thick ink can also be deeply cured. The power supply supports 1-100% adjustment and can be connected to external signal linkage turntable equipment. It is equipped with various safety protections such as fault alarm, short circuit, overvoltage, overcurrent, etc. It is suitable for UV ink curing of printing on various materials such as plastic, glass, metal, 3C electronic products, keyboards, phone cases, etc. The source factory supports customization.





Product parameter specifications:

Item Specification
Model LDLW-68C20045038401
Emitting Area 200×450mm
Wavelength 395nm (Customizable:365/385/405nm)
Light Intensity 17000mW/cm²
Max Power 5500W
Power Adjustment 1%~100% continuously adjustable
Service Life ≥15000h
Cooling Method Water circulation cooling
Number of Lamp Heads 1 (Customizable)
Control Mode Local control / External PLC control
Protection Function Short-circuit, overload & overvoltage protection, fault alarm
Application Rotary screen printing, pad printing, label printing; UV ink curing for plastic, glass, metal & 3C electronics





Source factory, supporting customized luminous size and control solutions, one-stop solution for UV curing problems in rotary printing! Please contact us for more details.